ESP motor cooling

UMS Flowell’s ESP Shroud adapter is an easy way to create a shroud around your ESP to improve cooling past your motor or to hang tailpipe below the ESP to stab into a lower completion.
The tailpipe assembly with shroud casing and shroud adapter is run in hole and set in the slips. The ESP is made up as normal and installed in the shroud using the top of the shroud casing adapter as a work table to land the ESP lift clamps. The shroud discharge head is made up to the tubing and the lower flange made-up to the pump head. The ESP and shroud discharge head are then landed in the shroud and secured using locking screws. The compression strength is limited by the tubing.

EDS-037 REV AA – ESP Shroud

EDS-041 REV AA – Shrouded intake